Mira Orbis User's Guide download pdf (Page 26)

Clean with mild washing up detergent or soap solution. Wipe dry with a soft

cloth.

Poor shower performance can be avoided by cleaning the spray plate. Use

thumb or soft cloth to wipe rubber nozzles. The handset must also be descaled

regularly.

Make sure that the electrical supply

is turned off at the mains and that the

water supply is fully turned off.

Remove the three screws. Carefully

remove the cover, making sure that you

do not strain the multi-connector.

Carefully remove the multi-connector

from the socket on the control PCB in

the case. Remove the service tunnel.

Hold a wrench across the ats of the

metal connector. Unscrew the filter

using another wrench as shown. Clean

or renew the Filter as necessary. Ret

in reverse order making sure the Filter

is screwed fully home.

Do not overtighten. Make sure plumbing

connections are tight before restoring

the electricity and water supply. Check

for leaks.

Ret the Service Tunnel and connect

the multi-connector to the socket on

the PCB.

Ret the Cover. Make sure that it ts

correctly. Do not overtighten screws.

Inlet Filter - Cleaning/Renewing

Read the section “Important Safety Information” rst

Cover

Cover Retaining

Screw

Service Tunnel

Filter

Maintenance

Handset - Cleaning

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Mira Orbis User's Guide Page 26