Mira SHOWER FITTINGS User's Guide download pdf (Page 13)

13

Corner Mounting

1. For corner mounting first follow

instructions on pages 7 and 8,

steps 1 to 6.

2. Hold the slide rail assembly against

the wall in the desired position.

3. Use the slide rail supports as a

template and mark the position of

the two top xing holes and the two

bottom xing holes.

Note! Check that the slide rail

supports are sitting on both walls

before drilling xing holes.

4. Drill two 8mm xing holes at the top

of the slide rail and two at the bottom

of the slide rail.

Caution! Make sure that you avoid

buried pipes and cables when you drill

the wall.

5. Fit the wall plugs.

6. Hold the slide rail against the wall and

gently screw the slide rail into position.

Check that the slide rail is vertical and

make any adjustments before fully

tightening the xing screws.

7. Push on the slide rail support

covers.

8. To complete the installation follow

steps 13 to 19 on pages 11 and 12

Screw Fixing Holes For Corner Position

Screw

Slide Rail Support

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments