Mira Vie Installation Guide download pdf (Page 2)

IMPORTANT SAFETY INFORMATION

WARNING - This shower can deliver scalding

temperatures if not operated, installed or maintained

in accordance with the instructions, warnings and

cautions contained in this guide and on or inside

the appliance.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK

OR INJURY:

1. Make sure that you fully understand how to

operate this shower before use, read all operating

instructions and retain this guide for future

reference.

2. This shower can be used by children aged from

8 years and above and persons with reduced

physical, sensory or mental capabilities or lack

of experience and knowledge if they have been

given supervision or instruction concerning use of

the appliance in a safe way and understand the

hazards involved.

3. Children should be supervised to ensure that they

do not play with the shower.

4. DO NOT switch the shower on if there is a possibility

that the water in the shower is frozen.

5. DO NOT switch the shower on if water leaks from

the shower unit. Isolate the electrical supply to the

shower immediately.

6. DO NOT switch the shower on if the case appears

to be damaged or incorrectly tted. Isolate the

electrical supply to the shower immediately.

7. Switch off the appliance at its electrical isolating

switch when not in use. This is for safety and is

recommended with all electrical appliances.

8. DO NOT connect the outlet of the shower to any

tap, control valve, trigger handset or showerhead

other than those specied for use with this shower.

Only Kohler Mira recommended accessories

should be used.

9. Always check the water temperature before

entering the shower. Sunburn or skin conditions can

increase your sensitivity to hot water. Make sure

that you set the shower to a cooler temperature.

10. DO NOT operate the temperature control rapidly,

allow 10 – 15 seconds for the temperature to

stabilise before use.

11. Care is required if the shower is turned off and back

on during showering as this may result in unstable

temperature. Ensure temperature has stabilised

before re-using shower.

12. The showerhead must be de-scaled regularly, refer

to the user maintenance section towards the rear

of this guide for details.

Read the section “Important Safety Information” rst.

OPERATION

1 2

Switch on the electrical supply. Push START/STOP button.

Turn power control to the

desired position.

Adjust temperature as

required.

COLD

HOT

Allow 10 - 15 secs for any

temperature adjustments

to stabilise and reach the

showerhead.

Check water temperature

before entering shower.

7 8

Push START/STOP button. Switch off the electrical supply.

Water inlet pressure uctuations due to other draw offs (e.g.

ushing toilet) will cause the showering temperature to increase.

For a cold shower select LOW

For a summer warm shower select ECO/HIGH

For a winter warm shower select HIGH

Adjust the temperature as required

Flow rate will reduce when temperature setting is increased.

The Effect of Other Water Devices

Showering temperature will

stabilise to within 6°C band

if other outlets are opened

whilst showering, providing

the minimum pressure does

not fall below 70 kPa (0.7 bar).

Selected

Showering

Temperature

Example of how shower temperature stabilises

due to pressure changes.

The Effect of Seasonal Changes

Incoming mains water temperature is not constant throughout

the seasons of the year i.e. cooler during the winter, warmer

during the summer. These changes can affect the outlet

temperature of the shower, therefore the shower temperature

may need to be increased or decreased to maintain the desired

showering temperature.

COLD

HOT

A small amount of water may

continue to drain over a few

minutes.

WARNING! Turning the shower off and back on during showering

may result in unstable temperatures at the showerhead. Always

ensure the temperature has stabilised before re-using the shower.

Note! A slight hissing sound may be heard from the shower

during operation. High mains water pressure and high shower

temperatures will affect the tone. This is quite normal in use.

13. The shower hose must be checked regularly and

replaced if damaged, refer to the user maintenance

section towards the rear of this guide for details.

14. The shower must be operated and maintained in

accordance with the requirements of this guide.

15. If any of the following conditions occur, isolate the

electricity and water supplies and contact Kohler

Mira Customer Service.

• If the case is damaged or the cover is not

correctly fitted and water has entered the

shower case.

• If the shower begins to make an odd noise,

smell or smoke.

• If the shower shows signs of a distinct change in

performance indicating a need for maintenance.

This shower should not be disposed of with your general

household waste. When this shower has reached the end

of its serviceable life please take it to a recognised WEEE

(Waste Electrical and Electronic Equipment) collection

facility such as your local civic amenity site for recycling.

Your local authority or retailer will be able to advise you of

your nearest collection facility.

Mira Electric Showers covered by this guide:

Product kW Model Number Colour

Mira Vie

8.5 J08 Ab

White / Chrome

9.5 J08 Bb

Mira Go

8.5 J08 Aa

9.5 J08 Ba

Guarantee

This product has been designed for domestic use only,

Mira Showers guarantee this product against any defect in

materials or workmanship for a period of two years from the

date of purchase (shower ttings for one year).

For terms and conditions, refer to the back cover of this

guide.

Recommended Usage

Domestic



Light Commercial



Heavy Commercial



Healthcare



Patents and Design Registration

Design Registration: 001375497-0001

Patents: GB 2 427 460

Ireland 85912

INTRODUCTION

Thank you for choosing a Mira shower. To enjoy the full

potential of your new shower, please take time to read this

guide thoroughly, and keep it handy for future reference

Products manufactured by Kohler Mira Ltd are designed

to be safe provided, that they are installed used and

maintained in good working order, in accordance with our

instructions and recommendations.

Follow all warnings, cautions and instructions contained in

this guide, and on or inside the shower. This guide is also

available in electronic format on our website or by contacting

customer services.

This product has separate controls for power selection and

for temperature / ow adjustment. A unique ow regulator

stabilises any temperature changes caused by water

pressure uctuations, which can result from taps being

turned on or off or toilets being ushed.

Electrical and electronic devices contain a range of

materials that can be separated for recycling and

used in new products.

1 2

Mira Vie 1

Comments to this Manuals

No comments

Mira Vie Installation Guide Page 2

Comments to this Manuals

Related products and manuals for Sanitary ware Mira Vie